We must understand that there are various types of facades for buildings, one of the most common being stone facades.
Due to their high weight, stones require a very strong mortar for better adhesion to the surface, which does not deteriorate over time and does not lead to falling.
The consequences and dangers resulting from falling stones are irreparable. Additionally, structural settlements may cause cracks in the stones, which can also compromise the insulation of the structure. During snowfall or rain, moisture on the surface penetrates inside, leading to efflorescence and discoloration of the final surface (stone). Therefore, if water infiltration into the structure is not prevented, it will result in costly damages (such as damage to plaster, cement, and the interior facade of the building).
The nanotechnology products of NSG Company, due to their high permeability properties, completely fill the gaps behind stones and the surfaces of joints, preventing water from penetrating into the structure.
N50 Concrete Adhesive and Additive:
The high permeability and fluidity of this product ensure that, after injection into the joints and construction seams, voids and cavities behind the stone are filled. Additionally, once dried, the product provides strength to the stone due to its high resistance and adhesion.
B70 Mortar Adhesive and Additive:
This product increases the density and reduces the permeability of the mortar, allowing for the creation and application of stone and tile mortar in facades. (It can be applied up to a thickness of 5 centimeters.)
