A chlorine-free liquid with lubricating properties, reducing water in concrete and dispersing cement particles, is used to improve the quality and performance of concrete without reducing its strength, thereby maintaining its cohesion. Additionally, after use in concrete, it increases slump and produces self-leveling concrete. This material, based on polycarboxylate ether, effectively disperses cement particles at the start of hydration (due to its electrostatic charge) and its molecular chains strongly prevent the re-aggregation of cement particles. This behavior results in the permanent maintenance of cement particles in a separate and dispersed state, creating a fluid concrete with a very low water content.
Reducing the Dispersion of Cement Particles
Reducing Concrete Vibration
At Different Ages
To the Rebar and Steel (Structural Components)
Chloride-Free
Saving Water Consumption
In the long term
Production of High-Performance Concrete
Maintaining compressive strength at different concrete ages, reducing water mixture by up to 30% with constant workability, enhancing the adhesion of concrete to rebar and steel, facilitating pumping and reducing vibration time, increasing the impermeability of concrete, reducing the water-to-cement ratio and saving water and cement consumption, improving concrete performance, maintaining slump over an extended period, increasing the flexural strength of hardened concrete, increasing the slump of concrete at a constant water-to-cement ratio, and maintaining the slump of concrete at a lower water-to-cement ratio.
Concrete placement in cold weather, used in ready-mix and precast concrete industries, self-compacting concrete construction, high-speed concrete placement, producing concrete with high early strength and long-term durability, manufacturing floor screeds, and casting components with densely reinforced rebar.
It is recommended to conduct on-site tests before implementation to accurately determine the required amount of product.
Please note that you should never add this product to dry materials.
Mixing should be done for 10 minutes at high speed.
Between 0.2% and 1% of the weight of cement
Depending on the materials used and workshop conditions.
Note: Please carefully read the following points before use:
All trademarks and brands of this company are registered with the Intellectual Property Office of Iran. Therefore, any copying, imitation, or counterfeiting will be subject to legal and judicial action.
20 Liters
4 Liters
This material is based on polycarboxylate ether.
Significant increase in compressive strength of concrete, concrete waterproofing, reduction of water mixture by up to 30%, facilitation of pumping capability, and more
Between 0.2% and 1% of the weight of cement
No, there is a possibility of over-dosing the concrete or separation of the mortar from the aggregate.
In case of freezing, the SH7 superplasticizer can be gently warmed and stirred to become usable again.
Between 0.2% to 1% of the cement weight should be mixed for 10 minutes at high speed to ensure that the SH7 superplasticizer is fully incorporated into the concrete.
Safe Purchase
Certified by: E-Trust Symbol, Online Business License, National Digital Media Registration Badge
National Union of Virtual Businesses
Internet Business Trade Association
Internet Websites Regulatory Authority
E-Trust Symbol
NSG Engineering Group, established in 2000, is dedicated to advancing the construction industry through knowledge-based innovation. We specialize in: Cutting-edge waterproofing and moisture barriers, Advanced concrete and mortar additives, State-of-the-art construction resins and adhesives. Our products leverage nanotechnology and water-based formulations, offering safer, more efficient alternatives to traditional methods. As pioneers in Iran’s construction sector, we’re committed to localizing emerging technologies and driving industry progress.
© 2025 Noavaran Sanat Padab. All Rights Reserved | Designed and Developed by NSG IT Department
