This ready-to-use, milky-colored sealant has a 100% waterproofing property and is a definitive replacement for traditional mortars. It is used for repairing and renovating joints (without the need for demolition), sealing and grouting stone, mosaic, tile, and ceramic surfaces around sinks, water and sewage pipe inlets and outlets in places such as bathrooms, kitchens, living rooms, pools, saunas, and Jacuzzis, terraces, and all wet areas where the grouting has been damaged and there are issues with dampness and moisture.
Without the need for demolition
Anti-moss, algae, and bacteria
Resistance to water and moisture
To various surfaces
Equivalent to the lifespan of the structure
Also UV rays and CO2 gas
No need for operational personnel
over time
The PADAB water-sealing jointing compound, based on acrylic resins and utilizing nanotechnology, is capable of penetrating any type of joint and seam. It also possesses excellent adhesion strength on various surfaces, including iron, wood, and glass. Traditionally, waterproofing and addressing dampness issues involved the destruction of old insulation layers, significant expenses, and environmental disruption. However, using this compound eliminates the need for demolition, making it possible to resolve waterproofing, repair, and renovation of joints without hassle.
The PADAB jointing compound can withstand temperatures ranging from -75°C to 350°C after application and is environmentally friendly. It is fragrant and highly resistant to various household and industrial cleaning agents, acids, UV rays, and CO2. It prevents the growth and penetration of moss, algae, and bacteria on the insulated surface and easily withstands positive and negative water pressures.
Permanent replacement of traditional mortars with high durability, no environmental degradation or disruption, fragrant and hygienic, high resistance to abrasion, high resistance to acids and various household and industrial detergents, quick and easy application, can be applied by anyone without needing specialized labor, no corrosion or color change over time, free from any skin or respiratory side effects, saves time and cost, no need for operational personnel to visit the site, extremely high resistance to water and moisture penetration, excellent adhesion to various surfaces (including iron, wood, and glass), approved by laboratories under the supervision of the Ministry of Health for use in drinking water tanks
This paste is used for sealing, repairing, and waterproofing all joints and seams of stone, tile, ceramic, brick, wood, and more in places such as kitchens, halls, pools, saunas, hot tub, around sinks, water pipes, and more.
Due to its high sealing power and strong resistance to acids and household and industrial detergents, this product is recognized as a sealant adhesive and joint filler in the building waterproofing, repair, and renovation sector.
Clean the joints and seams from loose materials, debris, and any contamination (grease, dust, oil, etc.) as much as possible. Use a lint-free cloth to wipe the area clean and dry. Massage the tube for two minutes to ensure the contents are thoroughly mixed and uniform. Then, fill the seams and joints with the contents of the tube. After filling the seams and joints, you can remove any excess from the surface using a trowel or a glass scraper, and clean around the joints with a lint-free cloth.
(To eliminate gaps and voids beneath the surface of stone or tile, create a paste using adhesive and N50 additive, and inject it.)
A: Caulking and repairing cracks up to 2 mm thick
Inject the gel between the joints and cleaned areas, and smooth the surface with your finger or a trowel. After 10 to 20 minutes (depending on humidity and ambient temperature), the PADAB waterproofing joint sealant paste will reach its initial set and begin to harden. During this time, clean the areas around the joints or any spots accidentally exposed to the gel using a blade or a cloth. (Ensure the gel remains only between the joints.)
Note that if you do not do this in a timely manner, it will be difficult to remove the excess after it dries.
This paste will be completely dry after 7 to 12 hours (depending on humidity and ambient temperature), and the area will be washable. If possible, perform this task when you do not need to access the site for the next 12 hours.
B: Color combination (colorful plastering)
In case of a color change, mix each tube of PADAB waterproofing sealant in a separate container with the desired water-based color.
C: Joint sealing and crack repair in thicknesses of 2 to 5 mm
Execute stage A up to a thickness of 5 mm. After 10 to 20 minutes, cracks may appear on the applied surface (due to the high thickness). At this stage, use PADAB waterproofing jointing paste to repair all surface cracks that have formed.
Each tube covers 2 square meters or 5 meters in length.
Note: Please read the following carefully before use:
All trademarks and brands of this company are registered with the Intellectual Property Office of Iran. Therefore, any copying, imitation, or counterfeiting will be subject to legal and judicial action.
15 Pieces in a Pack
Single Tube
White-colored grout with the properties of repairing and sealing grout joints.
Each tube covers 2 square meters or 5 meters in length
The initial setting of the waterproofing sealant gel occurs within 10 to 20 minutes, and the secondary setting takes place between 10 to 12 hours (depending on ambient temperature).
No, but if color change is needed, the PADAB waterproof jointing compound can be mixed with colored pigments (powder colors) and applied.
The waterproofing joint sealant PADAB has the ability to adhere to any surface (wood, stone, cement, etc.)
No, after drying, the PADAB waterproofing mortar becomes completely hard and rigid, losing its elastic properties, and it cannot be scraped off the surface at all.
Safe Purchase
Certified by: E-Trust Symbol, Online Business License, National Digital Media Registration Badge
National Union of Virtual Businesses
Internet Business Trade Association
Internet Websites Regulatory Authority
E-Trust Symbol
NSG Engineering Group, established in 2000, is dedicated to advancing the construction industry through knowledge-based innovation. We specialize in: Cutting-edge waterproofing and moisture barriers, Advanced concrete and mortar additives, State-of-the-art construction resins and adhesives. Our products leverage nanotechnology and water-based formulations, offering safer, more efficient alternatives to traditional methods. As pioneers in Iran’s construction sector, we’re committed to localizing emerging technologies and driving industry progress.
© 2025 Noavaran Sanat Padab. All Rights Reserved | Designed and Developed by NSG IT Department
