Waterproofing of the bathroom

Waterproofing of bathrooms and toilets in building construction is critically important, as improper execution can lead to significant issues. After completing the groundwork and flooring of the toilets, the next step involves the execution of the most crucial and sensitive phase insulation and waterproofing.

By utilizing Z90 waterproofing adhesive and resin, it is possible to achieve a cost-effective, long-lasting waterproofing solution for the toilets

Advantages Of Waterproofing Bathroom With NSG Products

Easy Application Method
High Durability and Longevity
cost-effective
Ability to penetrate to the depth of surfaces
Non-flammable
Lightweight and Compact Volume

Fragrant, Algae, Moss, and Bacteria Resistant
Resistant to UV Rays and CO2 Gas
Resistant to Temperature Fluctuations
Environmentally Friendly
Certified by Laboratories Under the Supervision of the Ministry of Health for Use in Drinking Water Reservoirs

Disadvantages of waterproofing bathrooms with petroleum-based membranes (bitumen and isogum)

Creating environmental pollution
The short lifespan of the insulation
Decomposition under UV radiation
High cost
Very difficult execution
Flowing of asphalt in high heat

Failure to seal the corners and edges of the structure
Cracking or peeling off the surface after a while
Creating cracks due to expansion and contraction
The production of toxic substances in drinking water reservoirs
flammable
The possibility of the growth of moss, algae, bacteria, and microorganisms
The unpleasant odor, the production of smoke, and the release of toxic gases

Frequently Asked Questions

Yes, the sealing adhesive and resin Z90 can be applied between the joints using method 111.

Yes, the waterproof grout paste PADAB can replace the second grouting stage of the sealing adhesive and resin Z90.

No, the Z90 sealing adhesive and resin is a penetrating type, and for sealing to be effective, it must penetrate into the depth of the surface. Since tiles and ceramics do not absorb water, it is only applied within the grout joints.

If the sealing adhesive and resin Z90 are spilled on tiles or ceramics, they must be wiped off the surface with a damp cloth before drying.