WS30 Waterstop

(A product for sealing construction and expansion joints)

Introducing Waterstop WS30

The flexible waterproofing strip is made of PVC, with a thickness of 3 mm and a width of 30 cm, used for sealing concrete joints and seams. It is available in two types: flat and ribbed. The flat waterstop is suitable for construction joints, while the ribbed waterstop is suitable for expansion joints

For sealing concrete joints and seams

With a thickness of 3 mm

The interval between the first and second concrete pours

Packed in 25-meter rolls

Suitable for expansion joints

Suitable for construction joints

Assistance with waterproofing in joints, fixed and moving seams

Tensile and bending stresses

Applications of Waterstop WS30

The WS30 waterstop is used to maintain structural integrity, seal joints, and areas where concrete pouring is interrupted, as well as fixed and moving joints.

General method of product installation: (Installation methods may vary depending on the location of application).

The placement of the waterstop is at the interface between the first and second concrete pours, positioned so that half of its width is embedded in the initial concrete and the other half in the secondary concrete. The waterstop is fixed between the reinforcement mesh. Furthermore, a clip can be used to ensure that it remains in place.

Approximate consumption rate of WS30 waterstop

Proportional to the dimensions of the structure per meter

Attention: Please carefully read the following before use:

Noavaran Sanat Padab (NSG) is the creator and sole owner of the WS30 brand.

All trademarks and brands of this company are registered with the Intellectual Property Office of Iran. Therefore, any copying, imitation, or counterfeiting will be subject to legal and judicial action.