A milky liquid with hardening and sealing properties, used in unlimited thickness for mixing in concrete or mortar. This product, based on acrylic resins and utilizing nanotechnology, is applied in the construction of concrete and cement structures, concrete mixing, and the production of repair mortars, stone and ceramic installation mortars, and repair mortars for concrete and cement surfaces.
The N50 concrete adhesive and additive can withstand temperatures from -75°C to +350°C after application and is environmentally friendly. It is fragrant and highly resistant to cleaning agents, UV rays, and CO2 gas
Increasing Concrete Strength
Environmentally friendly, resistant to UV sunlight and CO² gas
Prevention of corrosion of metal components embedded in concrete and mortar
With maintaining the concrete slump
Applicable in various thicknesses
Utilizing nanotechnology
Tensile and flexural strength of the structure
For use in potable water tanks
Enhancing the tensile and flexural strength of cement structures, possessing anti-freeze properties for concrete through accelerated hydration and reduced setting time, increasing cohesion and adhesion among the components of concrete, enhancing density (compactness) and reducing water permeability of waterproof concrete, significantly improving wear and traffic resistance, suitable for use as a midsection layer in various mortars and concretes (of any thickness), approved by laboratories under the supervision of the Ministry of Health for use in potable water tanks.
Construction and Concrete Works for Tanks and Waterways, Shear and Retaining Walls, Pools and Jacuzzis, Flooring of Various Traffic Areas, Cementing and Sub-Basing of High-Traffic Locations, Construction of Concrete Tables, High-Rise Stonework, Mortar Preparation for Mosaic and Stone Installation, Mega Concrete, Repairing Cracks and Filling Bolt Holes, Bonding New Mortar to Old Dried Mortar, Manufacturing High-Resistance and Long-Lasting Artificial Mosaic and Stone, Preventing Corrosion and Decay of Reinforcement (Absence of Chloride Ions)
Given these characteristics, this product has the highest consumption in the construction, repair, and concrete casting of structures.
A: Repair mortar and plaster
Combine one unit of N50 concrete adhesive and additive with three units of water to use as a slurry. (One unit of cement plus two units of sieved stone powder (micronized silica SI30) is the most suitable dry mix for repair mortar.)
B: Cement Mortar Work
Mix one unit of N50 concrete adhesive and additive with five units of water and use it for cement plastering. (One unit of cement plus five units of double-washed sand (without soil) is the most suitable dry mix for cement plastering.)
C: Concrete pouring
The mixing inside the transit mixer must be done for 10 minutes at high speed
For every cubic meter of concrete with a cement grade of 350: seven liters
For every square meter of mortar with a thickness of one centimeter: 250 cc
In concrete pouring: between 1% to 2% of the cement weight (one unit of N50 concrete adhesive and additive + twenty units of water)
In the execution of cement mortar and plaster: one unit of N50 concrete adhesive and additive + five units of water.
In the execution of repair mortar and injection grout: one unit of N50 concrete adhesive and additive + three units of water.
Note: Please carefully read the following points before use:
All trademarks and brands of this company are registered with the Intellectual Property Office of Iran. Therefore, any copying, imitation, or counterfeiting will be subject to legal and judicial action.
20 Liters
10 Liters
4 Liters
1 liters
A ratio of 1 to 3 with water (1 unit of N50 concrete adhesive and additive, and 3 units of water)
A ratio of 1 to 5 with water (1 unit of N50 concrete adhesive and additive and 5 units of water)
A ratio of 1 to 10 with water (1 unit of N50 concrete adhesive and additive, and 10 units of water)
The weight is 2% of the cement
The mixing inside the mixer is done for 10 minutes at high speed.
Constructing concrete tables, stone masonry at heights, installing mosaic and stone, and concrete curb, etc
Based on acrylic resin and water
N50 concrete adhesive and additive has no thickness limitation.
Safe Purchase
Certified by: E-Trust Symbol, Online Business License, National Digital Media Registration Badge
National Union of Virtual Businesses
Internet Business Trade Association
Internet Websites Regulatory Authority
E-Trust Symbol
NSG Engineering Group, established in 2000, is dedicated to advancing the construction industry through knowledge-based innovation. We specialize in: Cutting-edge waterproofing and moisture barriers, Advanced concrete and mortar additives, State-of-the-art construction resins and adhesives. Our products leverage nanotechnology and water-based formulations, offering safer, more efficient alternatives to traditional methods. As pioneers in Iran’s construction sector, we’re committed to localizing emerging technologies and driving industry progress.
© 2025 Noavaran Sanat Padab. All Rights Reserved | Designed and Developed by NSG IT Department
