Method of Using Grouting Gel and Waterproofing Gel PADAB:
First, clean the surface with a wire brush, blade, or another suitable tool to remove any looseness and contamination, and then wipe the area with a damp cloth to make it clean and dry.
Massage the tube for two minutes until its contents are completely soft and uniform. Then, open the tube and, wearing disposable gloves, apply the gel to the joints, cracks, or the desired area. Smooth it out with your fingertip or a spatula.After 10 to 20 minutes (depending on the ambient temperature), the joint sealing gel and waterproof PADAB sealant will reach initial set and begin to harden.
Please clean the areas around the joints or spots that have unintentionally been coated with gel using a blade or damp cloth, ensuring that the gel remains only in the joints and cracks. Note that if this task is not performed in a timely manner, it will be difficult to remove any excess after it has dried.
This product dries in 7 to 12 hours (depending on the ambient temperature), and the area can be washed afterward. If possible, perform this task at a time when you will not need access to the application area for up to 12 hours.
