This group operates in the field of providing waterproofing materials, reinforcing agents, and concrete additives, with all products manufactured in Iran using nanotechnology.
Furthermore, the company has successfully obtained multiple certifications from European countries, the Iranian Concrete Association, and the Chemical Additives Union. (All products are environmentally friendly).
In the following section, we will briefly introduce the products and their functionalities:
Waterproofing Adhesive and Z90 Resin: A milky-white liquid with 100% waterproofing properties that becomes completely colorless after application. This material is used as a final coating and waterproofing agent for surfaces such as swimming pools, cement facades, concrete water or sewage tanks, rooftops, bathrooms, and other structures, which it completely seals by penetrating the surface structure.
B70 Mortar Adhesive and Additive: Used for cement mortar insulation, which also reinforces and increases the adhesion coefficient of the mortar.
N50 Concrete Adhesive and Additive: Used to increase adhesion coefficient in flooring and stone masonry.
P100 Facade Waterproofing Resin and Adhesive: A milky-white liquid that becomes colorless after application, simultaneously performing waterproofing and resin functions. Due to its exceptional brightness and glossiness, this product is particularly used in humid and humid regions because of its high viscosity.
PADAB Waterproofing and Sealing Gel:
This is a ready-to-use gel for sealing and waterproofing joints in bathrooms, swimming pools, jacuzzis, terraces, and kitchens. It is also used in all locations with moisture problems. This gel is antibacterial, anti-moss, and anti-algae, and is resistant to all industrial and acidic cleaning agents.
MA700 Instant Stopper:
This is a powder product with the ability to stop water flow in less than three minutes. It is specifically used to control and immediately halt water leakage in concrete surfaces and cement walls where water flow is visible.
SQ2000 Crystal-forming Powder: This powder, with a penetrating performance in concrete after application, reacts with water and lime present in cement. It also produces crystalline structures that block the tiny tubes and capillaries of concrete from within, controlling negative moisture.
PP Fibers: These glass fibers are a replacement for reinforcement bars in concrete and, by increasing flexural and tensile strength, prevent surface and deep cracks.
SH7 Superplasticizer: This substance reduces water content while increasing concrete slump. Consequently, concrete prepared with SH7 superplasticizer possesses high ultimate strength.
PLC Mesh: Due to its lightweight and high strength, it is an excellent substitute for controlling tensile and flexural stresses, as well as stresses caused by temperature fluctuations in cement and gypsum mortars.
Silica SI30: A substitute for aggregate in mortar, which can also be used as an alternative to stone powder and sand.
