Grouting Gel and Waterproofing PADAB:
- Clean the desired surface of any contaminants and materials such as aquarium glue, and after washing, wait until the area is completely dry.
- Massage the waterproof sealant gel tube for 1 minute, then open the cap and inject the gel into the gap between the sink and wall or other surfaces, guiding it into empty spaces with finger pressure.
- Wait approximately 2 hours for initial curing to occur and for the gel to dry completely. After initial curing, avoid contact with strong detergents, acidic, or alkaline substances for up to 24 hours to allow the gel to harden fully.
- If the gap is excessively wide or deep, after initial drying of the gel and observing small cracks, inject some gel again onto the cracked areas.
